Filter
Top Products
10 Quick Installation Guide
and the 12 screws (from the hardware kit) available when you begin
to install the chassis.
■ For a tabletop or shelf installation, make certain that you have a
Phillips screwdriver or flat-blade screwdriver and the hardware kit
available.
Before you attempt to mount the chassis in a rack, use the following
rack-mount installation guidelines to ensure your safety and optimal
performance. Review the guidelines before you install the chassis in a
rack.
■ Because the equipment rack environment can cause increased
ambient temperatures and reduced air flow, review the chassis
specifications and site requirements in Appendix A and Appendix B of
the Switch 4007R Getting Started Guide.
Figure 6 shows two types of racks that you can use.
Figure 6 Rack Types
1 Bolt the rack to the floor.
2 Brace the top of the rack against the wall. Make certain that the rack is
properly aligned and squared. Use a framing tool to ensure that the rack
is squared.
4007RQS.book Page 10 Friday, January 25, 2002 10:27 AM