Filter
Top Products
1-4
Rear Panel
Figure 1-4 Rear panel of the Switch 4510G 48-Port Ethernet switch
(1) AC power input (2) RPS power input (shipped with a protective cover)
(3) Grounding screw (4) Interface module slot 1 (MOD1)
(5) Interface module slot 2 (MOD2)
The Switch 4510G 48-Port provides two interface module slots on its rear panel. Each slot is installed
with a filler panel when the switch is shipped. You can select one or two interface modules for your
switch as needed. See
Optional Interface Modules on page 1-9 for the interface module models
supported by the Switch 4510G, and see
Installing an Interface Module on page 3-9 for the installation
of interface modules.
Ports
Console Port
Each Switch 4510G provides one console port on the front panel. Table 1-2 describes the console port
specifications.
Table 1-2 Console port specifications
Item Specification
Connector type
RJ-45
Compliant standard
EIA/TIA-232
Transmission baud rate 9600 bps to 115200 bps (defaulting to 19200 bps)
Service
z It can be connected to an ASCII terminal.
z It can be connected to a serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
10/100/1000Base-T Ethernet Port
Each Switch 4510G provides 10/100/1000Base-T Ethernet ports on its front panel. Table 1-3 describes
the specifications of the 10/100/1000Base-T Ethernet ports.