Filter
Top Products
3-2
The Switch 4510G support IRF. For details about implementation of the IRF system and installation
procedures, refer to
Installation Flow for an IRF.
Installing the Switch into a 19-Inch Rack Using Mounting Brackets
You can install a switch into a 19-inch standard cabinet in one of the following two ways:
z Use front mounting brackets
z Use front mounting brackets and a tray
Introduction to Mounting Bracket
Figure 3-2 Appearance of a standard front mounting bracket
(1) (2)
(1) Screw hole used to fix the mounting bracket to the cabinet (Use one M6 screw)
(2) Screw hole used to fix the switch to the mounting bracket
Use Front Mounting Brackets to Install a Switch
Follow these steps to mount a switch into a 19-inch standard cabinet:
Step1 Wear an ESD-preventive wrist strap and ensure a good skin contact and grounding.
Step2 Check the grounding and stability of the cabinet.
Step3 Take out the screws which are packed together with the front mounting brackets, and fix one end of
mounting brackets to the switch, as shown in
Figure 3-3.