Filter
Top Products
16 Chapter 1: Introducing the Router 5000 Family
Indicators Eight indicators are provided on 3Com Router 5012. Their meaning is
explained in the following table:
System Description
Table 2 Router 5012 Indicators
LED Indication
POWER System power LED: OFF means power is off, ON means power is on.
SYSTEM Hardware system operating LED. Blinking indicates that the system is
in normal operation. Steady ON or OFF means that the system is in
abnormal operation.
SLOT1 MIM LED. ON indicates that the interface module operates normally.
OFF indicates that no module is installed in the slot or the module
cannot operate properly.
SLOT2 SIC LED. ON indicates that the interface card operates normally. OFF
indicates that no interface card is installed in the slot or the interface
card cannot operate properly.
SLOT3 SIC LED. ON indicates that the interface card operates normally. OFF
indicates that no interface card is installed in the slot or the interface
card cannot operate properly.
WAN Fixed synchronous/asynchronous serial interface LED: Show the status
of data transceiving on the serial interface. OFF means that no data is
being transceived. Blinking means that data is being transceived.
LAN Fixed Ethernet interface 0 LED: Shows the status of data transmission
on the fixed Ethernet interface. OFF means that no data is being
transceived. Blinking means that data is being transceived.
Table 3 System description of 3Com Router 5012
Item Description
Slot Two SIC slots
One MIM slot
Fixed interface One 10/100 Mbps Ethernet interface
One WAN interface
One AUX port
One console port
CPU MPC8241 200 MHz
Boot ROM 512 KB
SDRAM 128 MB
Flash memory 32 MB
Physical dimensions
(H x W x D)
44.4 x 442 x 315 mm (1.7 x 17.4 x 12.4 in.)
Weight 6 kg (13 lb)