Filter
Top Products
Software Maintenance under v 3.11 Environment 61
To validate the new baud rate set on the console terminal, you must
disconnect and then reconnect the terminal emulation program.
4 Select [Transfer/Send file…] in the HyperTerminal window. The
following window pops up:
Figure 34 Send File dialog box
5 In the displayed Send file dialog box, click <Browse…> to select the
application image file to be downloaded, and select XMODEM for the
Protocol field. Then click <Send>. The following interface appears:
6 After completing download, the system begins writing to Flash memory
and upon its completion outputs the following information:
Download completed.
For an 3Com 5000 router, the system also prompts you to select file type
upon completion of downloading.
please select file to be saved as
1. main application file
2. backup application file
3. secure application file
4. cancel downloading
Enter your choice(1-4):
The system starts writing to Flash memory after you enter your choice
and displays:
Writing to flash memory...
Please wait,it needs a long time .Please wait...
########################################################
Writing FLASH Success.
Please use 9600 bps.Press <ENTER> key to reboot the system.