Filter
Top Products
3 - 18 ONline Ethernet 24-Port 10BASE-T Module Installation Guide
❑ Enabling Remote Diagnostics Mode
❑ Setting the Autopartition Threshold Value
For additional information on any network management command
described in this section, refer to the appropriate ONline Management
Module Installation and Operation Guide.
If Management is Not Available
When you first install the 24-Port Module in an unmanaged concentrator,
configure the 24-Port Module using the DIP switches as described in the
section Setting the DIP Switches. For additional information on all network
management features, refer to:
❑ The appropriate ONline Management Module Installation and
Operation Guide, or the ONcore Distributed Management Module
User's Guide
❑ The ONline Management Commands Guide or the ONcore
Distributed Management Module Commands Guide
Note: The 24-Port Module, Model Number 5124M-TP, is a 2-slot
module that has a double-wide faceplate but only one
circuit board. The slot number of the circuit board
determines the slot number of an installed 5124M-TP
module.