Filter
Top Products
3 - 24 ONline Ethernet 24-Port 10BASE-T Module Installation Guide
Show Module
To display information for a module in a specific slot, use the following
management command:
SHOW MODULE {
slot
} {no_verbose}
{verbose}
To display basic information about a 24-Port Module installed in slot 3,
specify the NO_VERBOSE command argument, as shown below:
ONline> show module 3 [ENTER]
Slot
Module Version Network General Information
03 5124M-TPCL 001 ETHERNET_2 Port (s) are down
Note: The NO_VERBOSE command argument is the default (you
do not have to enter it at the prompt).
To display detailed information about an installed 24-Port Module, specify
the verbose command argument, as shown below:
ONline> show module 3 verbose [ENTER]
Slot
Module Version Network General Information
03 5124M-TPCL 001 ETHERNET_2 Port (s) are down
5124M-TPCL: ONline Ethernet 24-PORT 10BASE-T Module
Auto-Partition Threshold : 255 COLLISIONS
Module Per Port Counters : CONNECTOR 1
Network for Connector 01 : ETHERNET_2
Network for Connector 02 : ETHERNET_2
Dip Network Setting for Connector 01 : ETHERNET_1
Dip Network Setting for Connector 02 : ISOLATED_1