Filter
Top Products
3 - 28 ONline Ethernet 24-Port 10BASE-T Module Installation Guide
Selecting the Per-Port Counters Connector
When you select a connector, network management monitors the other
connector collectively, reporting statistics for all 12 ports as a single “port.”
To select which 12-port connector you want network management to
gather counter statistics for:
SET MODULE {
slot
} PER_PORT_COUNTERS_CONNECTOR {1}
{2}
If you ask for information on a port that is not being monitored individually,
network management displays summary statistics and instructions for
getting more information on the selected port.
Note: The MONITOR PORT and SHOW COUNTER PORT
commands will function normally for the connector you
have selected.
Note: Changing which connector you are monitoring clears all
statistics counters. Use the CLEAR COUNTERS command to
erase extraneous statistics gathered during the switchover
from one connector to the other connector.