Filter
Top Products
Installing and Operating the Module 3 - 25
Show Port
To display information for a specific port, use the following management
command:
SHOW PORT {
slot.port
} {no_verbose}
{
slot
.all} {verbose}
To display basic information for a specific port, specify the NO_VERBOSE
command argument. To display basic information for all ports on the
24-Port Module, specify the ALL command argument.
Note: The NO_VERBOSE command argument is the default (you
do not have to enter it at the prompt).
In the following example, SHOW PORT ALL displays basic information for all
ports on the 24-Port Module installed in slot 5:
ONline> show port 5.all [ENTER]
Port Display for Module 5124M-TPCL :
Port Mode Status Network General Information
————— ———— —————— ——————— ———————————————————
05.01 DISABLED OKAY ISOLATED
05.02 ENABLED OKAY ISOLATED
05.03 ENABLED OKAY ISOLATED
05.04 DISABLED OKAY ISOLATED
.
.
.