Filter
Top Products
92 CHAPTER 6: SWITCH MONITORING AND MAINTENANCE
inet on ethernet (e) : 1.1.1.1
host inet (h) : 1.1.1.2
flags (f) : 0x80
Prepare for loading....OK
Loading......done
flash:/s8500.app already exist,
delete it?(Y/N):y
Deleting file------------------------------------------------------
-------------------------------------------------Done
Free flash Space : 15862784 bytes
Writing Flash------------------------------------------------------
--------------------------------------------------------------------
--------------------------------------------------Done
8 The system accesses the Ethernet interface submenu again as shown below.
ETHERNET SUBMENU
1. Download file to SDRAM through ethernet interface and boot
2. Download file to Flash through ethernet interface
3. Download file to HardDisk through ethernet interface
4. Modify ethernet interface boot parameter
0. Return to main menu
Enter your choice(0-4):
Upgrading software
Using (FTP)
The Switch 8800 Family applications can also be updated through the Ethernet
port using FTP.
n
This procedure uses a Switch 8814 work as the FTP client.
1 Connect the switch to the PC containing the file using the management/upgrade
Ethernet port. (You need the IP address of the PC.) Connect the switch to an
external PC (that can be the same one that contains the file) through the console
port.
2 Run the FTP server on the PC connected to the management/upgrade Ethernet
port. Specify the path to the upgrade file and set the login username and
password.
3 Run the terminal emulation program on the PC connected to the Console port,
and boot the Switch to access the Boot menu.
4 See the corresponding steps (4 through 8) in the upgrading procedure using TFTP
above.
n
If you want to download files using FTP, please set the flags to 0x0 when setting
the Ethernet interface parameters.
5 After downloading the host program through the Boot menu, you must specify it
as the next boot program. In the following example, the host program is Switch
8800 Family-Comware 310-R1212.app.
MAIN MENU
1. Boot with default mode
2. Boot from Flash
3. Boot from CF card
4. Enter serial submenu
5. Enter ethernet submenu
6. Modify Flash description area
7. Modify bootrom password