Filter
Top Products
34 CHAPTER 3: BEFORE YOU BEGIN
Adding TCP/IP to Your
Protocols List
If you ran the EZ-LAN Wizard on your computer and found that TCP/IP was not
bound to your Ethernet adapter, follow the steps to add TCP/IP to your protocols
list, according to your operating system:
Windows 95 and 98 To add TCP/IP to your protocols list for Windows 95 or 98:
You may be prompted for your Windows 95 or 98 installation disks or CD-ROM.
1 From the Control Panel, double-click Network.
The Network dialog box appears.
Figure 16 Network Dialog Box
2 Click Add.
The Select Network Component Type dialog box appears.
Figure 17 Select Network Component Type Dialog Box
3 Select Protocol and then click Add.