3Com Dual 56K Network Card User Manual


 
62 CHAPTER 6: CONFIGURING THE DUAL 56K LAN MODEM FOR PRIVATE NETWORK ACCESS
The ISP Wizard appears.
7 Click Abort to bypass the ISP Wizard and go directly to the LAN Modem’s Main
Configuration Page, also called the WebWizard.
The LAN Modem homepage opens, as shown in Figure 40.
Figure 40 Dual 56K LAN Modem Main Configuration Home Page
8 From the Main Configuration Home Page, click the Service Providers icon.
The Service Provider Selection window appears, as shown in Figure 41.
Service Provider is the general term used by the LAN Modem to define any type
of remote dial-out destination. For purposes of routing traffic, the LAN Modem
recognizes two categories of Service Providers: Internet Service Providers, for
direct connection to the Internet, and Private Network (Service Providers), for
direct connection to a remote private network. If you configured the LAN Modem
for shared Internet access before beginning this configuration, then you have
already created one Service Provider profile. You can configure up to four Service
Provider profiles.