3Com WL-455 Network Card User Manual


 
47
WPA CONFIGURATION FOR WINDOWS XP
The following table shows how to configure the access point to support the various
authentication and encryption options available for Windows XP Wireless Zero
Configuration.
The following notes apply to configuring the access point for WPA under Windows
XP:
A WPA-capable wireless network interface card is required.
The Windows XP Support Patch for Wireless Protected Access, which you can
download from the Microsoft Web site, is required.
To allow WEP clients, clear the WPA Configuration Required check box and enter
an appropriate WEP key.
For all WPA configurations, 802.1x must be enabled on the Authentication page.
Windows XP Wireless Zero
Configuration
Access Points 7250/8250/8500/8750
Authentication Encryption Authentication Encryption Other
Open Disabled Open System Disable
WEP Open System Enable Enter static keys under
WEP Configuration
Shared Disabled Not available
WEP Shared Key Enable Enter static keys under
WEP Configuration
WPA AES Not available on 8200
TKIP Open System Enable WPA Configuration:
Required
Multicast Cipher Mode:
TKIP
WPA Key Management:
WPA 802.1x
WEP Open System Enable WPA Configuration:
Required
Multicast Cipher Mode:
WEP
WPA Key Management:
WPA 802.1x