Filter
Top Products
40
Trap Destination 3—Select Enable to set up a third trap manager to receive
these messages.
IP Address—Fill in the IP address box for the third trap manager that will
receive these messages.
Community Name—Fill in the community string box for the third trap
manager that will receive these messages. (Maximum length: 23
characters)
Trap Destination 4—Select Enable to set up a fourth trap manager to receive
these messages.
IP Address—Fill in the IP address box for the fourth trap manager that will
receive these messages.
Community Name—Fill in the community string box for the third trap
manager that will receive these messages. (Maximum length: 23
characters)
TRAP CONFIGURATION
Select the types of traps you want the access point to generate.
Trap Description (When the Trap is Sent)
sysSystemUp Sent when the access point is fully up and running.
sysSystemDown Sent before the access point is about to reboot.
sysRadiusServerChanged Sent when the RADIUS server has changed from
Primary to Secondary, or Secondary to Primary.
dot11StationAssociation Sent when a station successfully associates with the
access point. The trap also includes the MAC
address of the station that has associated.
dot11StationReAssociation Sent when a station successfully reassociates with
the access point. The trap also includes the MAC
address of the station that has associated.
dot11StationAuthentication Sent when a station successfully authenticates with
the access point. The trap also includes the MAC
address of the station that has associated.
dot11StationRequestFail Sent when a station fails to associate, reassociate, or
authenticate with the access point. The trap also
includes the MAC address of the station and the
reason code for the failure.
dot1xAuthFail Sent when a station fails to authenticate with the
RADIUS server. The trap also includes the MAC
address of the station that failed to authenticate.
dot1InterfaceAGFail Sent when the 802.11g wireless interface fails.