Filter
Top Products
194 CHAPTER 7: IP SERVICES COMMANDS
Examples — The following command sets the date to March 13, 2003
and time to 11:11:12:
WX4400# set timedate date feb 29 2004 time 23:58:00
Time now is: Sun Feb 29 2004, 23:58:02 PST
See Also
clear summertime on page 135
clear timezone on page 136
display summertime on page 154
display timedate on page 155
display timezone on page 155
set summertime on page 191
set timezone on page 194
set timezone Sets the number of hours, and optionally the number of minutes, that the
wireless LAN switch’s real-time clock is offset from Coordinated Universal
Time (UTC). These values are also used by Network Time Protocol (NTP), if
it is enabled.
Syntax —
set timezone zone-name {-hours [minutes]}
zone-name — Time zone name of up to 32 alphabetic characters. You
can use a standard name or any name you like.
- (minus sign) — Minus time to indicate hours (and minutes) to be
subtracted from UTC. Otherwise, hours and minutes are added by
default.
hours — Number of hours to add or subtract from UTC.
minutes — Number of minutes to add or subtract from UTC.
Defaults — If this command is not used, then the default time zone is
UTC.
Access — Enabled.
History —Introduced in MSS Version 3.0.