Filter
Top Products
display service-profile 323
See Also
set service-profile auth-dot1x on page 373
set service-profile auth-fallthru on page 374
set service-profile auth-psk on page 375
set service-profile beacon on page 376
set service-profile cipher-ccmp on page 377
set service-profile cipher-tkip on page 378
set service-profile cipher-wep104 on page 379
set service-profile cipher-wep40 on page 380
set service-profile psk-phrase on page 381
set service-profile psk-raw on page 382
set service-profile rsn-ie on page 383
set service-profile shared-key-auth on page 384
WPA enabled Indicates that the Wi-Fi Protected Access (WPA) information
element (IE) is enabled. Additional fields display the settings
of other WPA parameters:
ciphers — Lists the WPA cipher suites advertised by
radios in the radio profile mapped to this service profile.
authentication — Lists the authentication methods
supported for WPA clients:
802.1X — dynamic authentication
PSK — preshared key authentication
TKIP countermeasures time — Indicates the amount of
time (in ms) MSS enforces countermeasures following a
second message integrity code (MIC) failure within a
60-second period.
Note: The WPA fields are displayed only when the WPA IE is
enabled.
vlan-name,
session-timeout,
service-type
Authorization attributes that are applied by default to a user
accessing the SSID managed by this service profile (in
addition to any attributes assigned to the user by a RADIUS
server or the local database).
See Table 44 on page 249 for a list of authorization
attributes and values that can be assigned to network users.
Table 64 Output for display service-profile (continued)
Field Description