3Com WX1200 Switch User Manual


 
208 CHAPTER 8: AAA COMMANDS
clear authentication
mac
Removes a MAC authentication rule.
Syntax
clear authentication mac {ssid ssid-name | wired}
mac-addr-glob
ssid ssid-name — SSID name to which this authentication rule
applies.
wired — Clears a rule used for access over a WX switch’s
wired-authentication port.
mac-addr-glob — A single user or set of users with access via a MAC
address. Specify a MAC address, or use the wildcard (*) character to
specify a set of MAC addresses. (For details, see “MAC Address
Globs” on page 27.)
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command removes a MAC authentication
rule for access to SSID thatcorp by MAC addresses beginning with
aa:bb:cc:
WX4400# clear authentication mac ssid thatcorp aa:bb:cc:*
See Also
clear authentication admin on page 204
clear authentication console on page 205
clear authentication dot1x on page 206
clear authentication last-resort on page 207
clear authentication proxy on page 209
display aaa on page 219
set authentication mac on page 239