Filter
Top Products
ENGLISH
9
E 3M 1997
3M
Multimedia Projector MP8660
3-2. Projector Set Up
Ambient Light
Whenever you have a choice, light the room from the rear, away from the projection screen. The MP8660 has
a brightness adjustment to achieve the best image possible.
Distance to Viewing Screen
The MP8660 can be used in a small or large meeting room to project a quality image from 51 cm (20 inches)
to 762 cm (300 inches) in size. The distance between the projector and the viewing screen and the zoom lense
setting (minimum to maximum) will determine the size of the projected image. Refer to the Technical
Appendix to determine how far away from the viewing screen you need to place the projector to fill the screen
with the projected image.
Remember that increasing the projector-to-screen distance also decreases the image’s brightness dramatically.
In other words, as the image grows larger, it also grows dimmer.
For best results, experiment to find the right combination of projector-to-screen distance and room lighting.
Carrying Handle
The MP8660 has a carrying handle that folds into the top of the projector housing. To raise the handle, push
up on the back end of the handle (Figure 3-14) and then lift upward.
Figure 3-14. Unfolding Handle
Ceiling Mount Considerations
An optional ceiling mount bracket (Figure 3-15) is
required to install the MP8660 from the ceiling. For
this type of installation, the image must be vertically
and horizontally inverted.
See section 9-1 to order the ceiling mount kit.
Figure 3-15. Optional Ceiling Bracket