Filter
Top Products
Scanner Options Scamax 2600 / 5000 DpuScan
5.4 Events and Actions
Use this dialog to set the actions that will happen with which event. The following example defines
that when a Patch II is found, the Chapter Counter is incremented and the Page Counter is reset. In
ther words, a new chapter has started within the batch. o
Illustration 13 – NDX Rules Patch II
The title line of the dialog displays to which mode the rules relate. On the left side, there is a list of
events that may happen. The box below gives a short description of the selected event; if an event
cannot happen, the reason is displayed here. If, for example, the Patchcode search is not enabled,
Patchcodes cannot be found.
The boxes at the start of each line can be checked only if at least one action is set. The user can
utilize them to make a rule void (e.g. for only the next job) without the need to completely set it again
at a later time.
Use the Reset button to reset all actions for the highlighted line, or for all events.
Page 33 of 42