Filter
Top Products
Scanner Options Scamax 2600 / 5000 DpuScan
1 Description of the Scanner Options
1.1 Introduction
This documentation is valid for the following scanners of the company InoTec:
• Scamax 2600 / Scamax 2500
• Scamax 5000
You must use the following driver: jukscsi
The scanner is connected using a standard SCSI interface board, and an ASPI driver must be
installed.
This program module was developed to enable the user to set the special options of the Admis S31
scanner. The jukscsi driver from Janich & Klass forwards these settings to the scanner.
The special scanner settings are offered with the user interface, spread over several pages.
Page 5 of 42