Filter
Top Products
Chapter 2 39
Setting the Boot Drive Sequence
The Boot Drive Sequence section lists boot priorities (1st, 2nd, 3rd, and 4th) for bootable drives in your
computer.
For example, the default value (1st:Floppy Disk, 2nd:Hard Disk, and 3rd: CD-ROM, 4th: Realtek PXE2.0 Boot
Agent) tells the computer to first search for a bootable floppy disk in the floppy drive. If it finds one present, it
boots up from that floppy disk. If not, the computer continues to search for a bootable CD-ROM in the CD-
ROM drive. If it cannot boot up from the CD-ROM drive, it continues by booting up from the hard disk and etc...
To set the boot drive sequence, use the
/ keys to select a priority level (1st, 2nd, 3rd, and 4th), then use
the
/ keys to select the device for that priority level.
NOTE: When Boot on LAN is set Enabled, then the 4th option: Realtek PXE2.0 Boot Agent shows in the list.
Boot on LAN When it is enabled, a remote host
with an appropriate boot image can
boot this computer via the internal
LAN.
Disabled or Enabled
Hotkey Beep Help: Enable or disable hotkey
beep.
Enabled or Disabled
Auto Dim Help: The system will support an
automatic dimming of the
LCD backlight when the AC power
is NOT available (running on
battery power).
Options: Enabled or Disabled
Help: Users could choose if to
display ‘Fn-F12 for multi-
boot’ message during post
Enabled or Disabled
F12 Multi-Boot When “Fn-F12” is pressed, a multi-
boot message will be displayed
during POST.
Enabled or Disabled
Parameter Description Format