Filter
Top Products
48 Chapter 3
Removing the LCD Module
1.
Remove the two screws as shown.
2.
Disconnect the LED/inverter board FPC cable and the LCD FPC cable from the mainboard.
3.
Release the two screws on the main unit.
4.
Lift up the LCD module cautiously.
Removing the TouchPad Module
1.
Use a flat-bladed plastic screw driver to detach the touchpad frame from the upper case.
2.
Remove the left and right touchpad button and the touchpad lower button.
730sg-1.book Page 48 Wednesday, December 1, 1999 6:03 PM