Filter
Top Products
Chapter 3 55
3. Release the two screws on the left side of the LCD panel.
4. Do the same for removing the two screws on the right side of the LCD panel.
5. Remove the left and right LCD brackets.
Removing the LED Board
1. Remove the two screws as shown below.
2. Disconnect the microphone cable.
3. Disconnect the inverter to led cable, and speaker to led cable.
4. Remove the LED board.
Removing the Microphone
1. Remove the microphone from the LCD module.
730sg-1.book Page 55 Wednesday, December 1, 1999 6:03 PM