Filter
Top Products
Chapter 3 93
Replacing the LCD Panel
1. Insert the LCD Panel cable into the LCD Panel
connector as shown.
2. Replace the adhesive strip securing the connector
in place.
3. Align the LCD brackets with the screw holes on the panel. Starting with the top most screws (marked with U)
replace the eight screws (four on each side) in the brackets as shown.
4. Place the LCD Panel in the back cover.
IMPORTANT: Ensure that the LCD power cable passes
through the hinge well and is not trapped under the
panel.
5. Secure the LCD module with the two securing
screws and replace the adhesive strips to hold the
cables in place.