Filter
Top Products
Chapter 3 91
19. Remove the two screws (2 x A) securing the launch board module.
20. Remove the launch board module from the upper case.
Removing the Fingerprint and Touchpad Module
1. See “Removing the Battery Pack” on page 60.
2. See “Removing the SD dummy card” on page 61.
3. See “Removing the ExpressCard dummy card” on page 61.
4. See “Removing the Lower Cover” on page 62.
5. See “Removing the DIMM” on page 63.
6. See “Removing the WLAN Board Modules” on page 63.
7. See “Removing the TV Tuner Board Modules” on page 64.
Step Size (Quantity) Color Torque
1~2 M2 x L4 (2) Black 1.6 kgf-cm