Filter
Top Products
64 Chapter 3
3. Disconnect the antenna cables from the WLAN board.
NOTE: There are 3 antenna cables connected to the WLAN board module. The Black antenna cable is
connected to number 1 connector, the White antenna cable is connected to number 2 connector and
the Gray antenna cable is connected to number 3 connector.
4. Move the antenna away from the WLAN board and remove the one screw (A) on the WLAN board to
release the WLAN board.
5. Detach the WLAN board from the WLAN socket.
NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Removing the TV Tuner Board Modules
1. See “Removing the Battery Pack” on page 60.
2. See “Removing the Lower Cover” on page 62.
Step Size (Quantity) Color Torque
1 M2 x L4 (1) Black 1.6 kgf-cm