Filter
Top Products
Chapter 3 81
15. Carefully remove the LCD module from the base unit.
NOTE: When connecting the cable back to the unit, please note that the cable should be routed well.
Separating the Upper Case from the Lower Case
1. See “Removing the Battery Pack” on page 60.
2. See “Removing the SD dummy card” on page 61.
3. See “Removing the ExpressCard dummy card” on page 61.
4. See “Removing the Lower Cover” on page 62.
5. See “Removing the DIMM” on page 63.
6. See “Removing the WLAN Board Modules” on page 63.
7. See “Removing the TV Tuner Board Modules” on page 64.
8. See “Removing the Hard Disk Drive Module” on page 66.
9. See “Removing the Optical Drive Module” on page 68.
10. See “Removing the Keyboard” on page 72.
11. See “Removing the Middle Cover” on page 73.
12. See “Removing the Power Board” on page 74.
13. See “Removing the Heatsink Fan Module” on page 75.
14. See “Removing the CPU and VGA Heatsink Module” on page 76.
15. See “Removing the CPU” on page 77.
16. See “Removing the VGA Board (Discrete Model only)” on page 78.
17. See “Removing the LCD Module” on page 79.
18. Disconnect the touchpad cable from the TPAD1 connector on the main board.