Filter
Top Products
Appendix B: SATA RAID configuration
100
RAID CU (configuration utility)
The RAID CU configures disk arrays and logical drives. The CU resides in
the BIOS and is independent of the OS. With the CU you can:
• Configure physical arrays and logical drives
• Initialize logical drives
• Rebuild failed drives
• Check data consistency
Using the RAID CU
Starting RAID CU
1 Before attempting to use the RAID CU, make sure to set the
Configure SATA as parameter in the BIOS setup to RAID.
To set the SATA channels as RAID:
(1) During bootup, press F2 to enter the BIOS setup screen.
(2) Select the Advanced menu, then press Enter.
(3) Under the Advanced menu, select Drive Configuration, then
press Enter. The following window appears.
(4) Set Configure S-ATA as parameter to RAID mode.