Filter
Top Products
Appendix C: SCSI RAID configuration
118
3Select YES. In the menu, the selected drive’s indicator will change
from READY to HOTSP.
4 Press Esc to end the array configuration.
5Select YES to Save Configuration, then press any key to return
to the Configuration menu.
Initializing a RAID volume
1 Press Esc to return to the Management menu.
2Select Initialize. All logical drives will appear under Logical Drives.
3 Using the spacebar, select the drive that you want to initialize. The
selected drive becomes yellow.
4 Press F10, then select YES to start initialization.
5 When initialization is complete, press any key to continue.
6 Press Esc to return to the Management menu.
7 To exit the utility and reboot the server, follow the steps below:
(a) Under the Management menu, press Esc.
(b) Select YES.
(c) Press Ctrl+Alt+Del to reboot the server.
8 Install an Operating System to the RAID array.