Filter
Top Products
39
Removing a DIMM
Before you can install a new DIMM in a socket, remove first any
previously installed DIMM from that socket.
Important: Before removing any DIMM from the mainboard,
make sure to create a backup file of all important data.
1 Observe the ESD precautions and pre-installation instructions
described on page 25.
2 Locate the DIMM sockets on the mainboard.
3 Press the holding clips on both sides of the socket outward to
release the DIMM (1).
4 Gently pull the DIMM upward to remove it from the socket (2).
Installing a DIMM
1 Observe the ESD precautions and pre-installation instructions
described on page 25.
2 Locate the DIMM sockets on the mainboard.
Note: For dual-channel interleave operation, a minimum of two
DIMM modules must be installed and following the socket
sequence: DIMM 1A and 1B first, then DIMM 2A and 2B.