Filter
Top Products
10
(Only for S5201)
2. SW source Detection：Please see Appendix E Item 9
22.0 Alarm sound
(Only for S5201B/ S5301WB)
22.1 Power on Beep sound Frequency follows Acer SW spec 1.19. Only one volume
22.2 Timer
Frequency follows Acer SW spec 1.19. Three kinds of
volume setting
3D Projection :
This function is only for 3D contents and must wear 3D glasses.
TI DDP DDP2430 TI DDP DDP2431
• Does not support FRC (Frame Rate
Conversion)
• Can not support HQFS 60Hz 3D source
from DVD which need to go thru FRC
• Can only support 120Hz 3D source from
PC (VGA/DVI/HDMI)
• Support FRC (Frame Rate
Conversion)
• Can support HQFS 60Hz 3D source
from DVD which need to go thru FRC
• Can support 120Hz 3D source from
PC
OSD :
− Add “3D”, “3D Sync L/R” in Image Page
− 3D : NVIDIA 3D, DLP 3D, off. Default is Off. All of acer 3D models are support both
NVIDIA and DLP. (V1.17 08/21 update)
− “3D Sync L/R” is adjustable when above "3D" is on. Otherwise gray out. When you
discover the inversion of the image depth (for your Left/Right eyes), do the invert
action to solve this condition. (V1.17 08/21 update)
When choose NVIDIA 3D , 3D Sync L/R is still gray out. (V1.18 09/30 update).
3D Sync L/R only enable for DLP 3D, otherwise it will be gray out (V1.18 09/30
update).
When 3D is enabled, Display Mode and Color temperature (in Color Page) is not
adjustable.
− Function disable :
When 3D is enabled, eView Management and all empowering function (eTimer,
eOpening, ePower) are gray out. eKey is disable (V1.18 09/30 update)
When meeting 60/120Hz (no matter 3D on or off, HSG only one set value), if
enduser adjust adjustable items (ex. brightness), the value will not been stored
and only for that use only.
− For DDP2430 models : 3D / 3D Sync L/R (V1.17 08/21 update) , only appear for
VGA/DVI/HDMI source. Disappear if other sources.
− For DDP2230/2431 models : no this limitation.