Acer S5301WB Projector User Manual


 
6
2.3.3 Screen distortion
S5201/S5201B : |A| <= 4.5 mm, |B| <= 4.0 mm, |C| <=
3.5 mm with 81” image size
S5301WB : |A| <= 6.0 mm, |B| <= 5.5 mm, |C| <= 4.0
mm with 95” image size
2.4 Projection Offset
S5201/S5201B : 130% ±5%
S5301WB : 110% ±5%
2.5 Focus Range
2.5.1 Visible Range 0.5~2m
2.5.2 Clearly Focus
Range
0.75~1.6 m(Spec. defined as item 2.6)
2.6 Focus
2.6.1 Pattern
(1) If pattern can be uniformly focused (not worse than
Limit Sample), then pass!
(2) If it’s difficult to judge, then check 2.6.2
2.6.2 Defocus and Flare
Defocus: R<=3.0; G<=3.0; B<=3.0 pixel
Flare: R<=3.5; G<=3.5; B<=3.5 pixel
Slight flare is not counted as flare.
2.6.3 Focus unbalance
Adjust focus from near to far until one corner clear,
difference less than 50 cm
Center of
49”diagonal area
All other area
R-G <2/3 <1
G-B <2/3 <1
2.7 Lateral Color
R-B <1 <1
2.8 Image Quality
2.8.1 DMD Image Quality
2.8.2 Image Imperfection
2.9 Lamp Type Philips 230W – 170W 0.9 E20.9 LL FusionStar
3.0 Mechanical Specification
3.1 Dimensions 290 x98.5x 254 mm (W x H x D)
3.2 Weight <3500g
3.3 Security Slot Kensington compatible slot 36kgf break away force
3.5 Lens Cover Detached lens cover
3.6 Feet
Fast adjustable foot in front, Adjustable foot in rear.
Front/ Rear foot Tilt:0-6 ,Right/Left: ±2.2
4.0 Packaging Detail refer to Packing Description
4.1 Outside Dimensions 375 x 216 x 370 mm (W x H x D)
4.2 Weight <5.5 kg (Including Accessories, Projector)
4.3 Transportation
30 EA by Air;
1500 EA @ 40’ container, or750 EA @ 20’ container by
Sea
5.0 Thermal Specification
Mechanical component temperature at ambience
0~35
5.1 Surface held or touched
for short periods
Metal < 65°C; Plastic<85°C
Metal Plastic
5.2 Surface which may be
touched
<65°C <85°C
5.3 Exhaust Air
<95°C
6.0 Environmental
Operating
0~35°C, without condensation
6.1 Temperature
Storage -30~65°C, without condensation