Filter
Top Products
8
Actiontec Network Attached Storage Device User Manual
9
Chapter 2 Configuring the NAS Device
Changing the Password
Although the administrator must create the user name and initial password, they
can be changed by the user. To do this:
1. Open a Web browser.
2. In the Address or Location text box, enter “http://” and the NAS Device’s IP
address. If using the default IP address, enter:
http://192.168.0.100
☞
Note: If the port number used by the NAS Device has been
changed (on the System screen) from the default (80), specify
the correct port number when connecting. For example, if the
current port is 8080, enter:
http://192.168.0.100:8080
3. The following screen appears.
4. To change the password, click Change Password. The following screen
appears.