Filter
Top Products
8
Actiontec Network Attached Storage Device User Manual
9
Chapter 2 Configuring the NAS Device
5. Enter the required data:
• User name - the login name of the NAS Device, created by the administrator
• Existing password - the current password
• New password - the new password
• Confirm new password - reenter the new password
6. Click Save to save the changes.
7. Click Home to return to the main screen.
USB Devices
A USB hard drive or USB Memory Disk (flash memory disk) can be inserted in the
NAS Device’s USB port at any time. Once the USB LED on the front panel comes on
and stays on, the USB device is available for use.
For a USB hard drive, the Device can recognize the FAT and NTFS file formats.
Removing a USB device - Method A (USB Hard Drive)
1. Press the “USB Eject” button on the rear panel. The NAS Device beeps.
2. Wait for the USB LED to start blinking slowly.
3. Remove the USB device.
Removing a USB device - Method B (USB Flash Drive)
1. Click the Flash Utility icon in the computer desktop’s system tray.
2. Select Safely Remove Drive.
3. Select the desired NAS Device.
4. Click Eject.
5. Wait for the USB LED to start blinking slowly. (The program will also display a
message when it is safe to physically detach the USB device.)
6. Remove the USB device.