Filter
Top Products
15
Using the
Administrative Utility
This chapter describes using the NAS Device’s Administration Utility. With the
Utility, the administrator can check the NAS Device’s status, add or delete users, or
create user groups.
Accessing the Administrative Utility
To establish a connection from a computer to the NAS Device:
1. Open a Web browser.
2. In the Address text box, enter “http://” and the NAS Device's IP address. If
using the default IP address, enter:
http://192.168.0.100
☞
Note: If the port number used by the Device has been changed
(on the System screen) from the default (80), specify the correct
port number when connecting.
For example, if the current port is 8080:
http://192.168.0.100:8080
3. Once connected, the following screen is displayed.
3