Filter
Top Products
26
Actiontec Network Attached Storage Device User Manual
27
Chapter 3 Using the Administrative Utility
Enable FTP Server
If this option is enabled, users can upload and download files via FTP (file transfer
protocol).
Allow anonymous FTP login (“guest” right)
The FTP server prompts for a user name and password when clients attempt to
connect. If this option is enabled, users will be able to enter “anonymous” as the
user name, and anything as the password. If this option is disabled, users must pro-
vide their correct user name and password.
Enable UPnP Support
If enabled, the NAS Device will broadcast its availability. On systems which support
UPnP (e.g., Windows Me, XP), an icon for the NAS Device will be automatically
generated.
Enable Print Icon
If enabled, the NAS Device places a printer icon for its print server in all print dia-
log boxes.
Port Number For HTTP…
This port number is used for Web browser connections to the NAS Device. The
default port is 80, as used by Web servers. If this is changed, use a number greater
than 1024 (8080 is often used). Also, if the port is not 80, specify the port in the
Web browser, in order to connect. To do this, add a “:” and the port number after
the address: e.g.,
http://192.168.0.100:8080
This example assumes the Device’s IP address is 192.168.0.100, and the port num-
ber is 8080.
Restore Default Config Button
Click this button to restore all settings on the NAS Device to factory defaults. Data
stored on the NAS Device will not be affected