Filter
Top Products
38
Actiontec Network Attached Storage Device User Manual
39
Chapter 3 Using the Administrative Utility
• Every Monday, Every Tuesday… - select this option to have the backup
performed once per week, on the specified day and time.
• The time text box (hour, minute, AM/PM) - specify at what time the
backup job should be performed.
Hard Drive
This screen allows the user to perform various disk operations on the USB hard
disk drive. No operations can be performed on a USB flash drive.
This screen has four sections: Prepare Disk, Self-Test (S.M.A.R.T.), Scandisk, and
Standby
Prepare Disk
Perfrom a Prepare Disk operation when a new USB hard drive is connected to
the NAS Device.
M
Warning: Performing a “Prepare Disk” operation will destroy
any data on the disk. Once started, this process cannot be halted
or reversed.
Status The Status text box can have any of the following values:
• Not installed - no disk is inserted, or connection or disk has failed.
• Not Prepared - disk has been detected, but not ready for use (press the
“Prepare Disk” button to prepare the disk for use).