Filter
Top Products
5-26
ANA-5910/5930/5940 User’s Guide
3
Start the drivers you need to use by entering the command and
in the following order:
Various command-line options are available for each utility. You can
get help for any of the commands listed in this appendix by typing
-h after the utility, for example:
aatmcnfg -h
aarpcnfg.exe
The
aarpcnfg.exe
utility is used for configuring the
aarp.sys
driver.
The following is the syntax for using this utility:
aarpcnfg [-f ConfigFile] -[s | d]
Options:
Use the -f ConfigFile option to start the
aarp.sys
driver with a
database file other than the default
aarp.db
.
aatmcnfg starts the
atmo.sys
driver; use the -q option if
you
do not
want to use SVCs and if you do not
want to register with an ATM switch (i.e., in
back-to-back connections); use the -a option if
your switch does not support ILMI address
registration
aarpcnfg starts the
aarp.sys
driver (only needed on the
ATMARP server)
acipcnfg starts the Classical IP part of
atmo.sys
alanecnfg starts the
alane.sys
driver.
-s shutdown
-d debug