Filter
Top Products
8-2
ANA-5910/5930/5940 User’s Guide
3
At the server system console prompt, type the following
command and press Enter:
search add a:
The following line appears:
Search 2: [DOS Path ] A:
4
Enter the following command, and press Enter:
load nwsetup
5
In the Install screen, press Esc to install the ATM software.
6
From the Select Operation menu, select Default Installation and
press Enter.
7
When the Install screen appears
a
To specify a path other than the SYS:\SYSTEM directory,
press F3
b
To install the Adaptec ATM files in the SYS:\SYSTEM
directory, press Enter
The system copies the files from the diskette onto the hard disk
drive, and the Install screen appears advising you of the
following:
■
Installation is complete.
■
You must modify your
autoexec.ncf
file. (See Automatically
Loading the ATM Driver on page 8-6 and Automating ATM
Software Installation on page 8-7.)
8
To exit the installation program, press Esc.