Filter
Top Products
8-1
8
▼▼▼▼
Installing ATM Software for
Novell NetWare
The Adaptec ATM software is designed to run under Novell
NetWare versions 3.12 and 4.1 and supports up to four Emulated
LANs (ELANs) with the well-known/configurable LAN Emulation
Configuration Server (LECS).
This chapter explains how to install, configure, load, remove, and
update Adaptec ATM software for Novell NetWare.
Installing Adaptec ATM Software for NetWare
3.12
This section contains instructions for installing and configuring
Adaptec ATM software for Novell NetWare 3.12 and for loading the
software automatically on system boot.
Note:
You must install NetWare 3.12 before installing the
Adaptec ATM software.
Installing the ATM Software
To install the Adaptec ATM software for Novell NetWare 3.12:
1
Boot the server.
2
Insert the
ALANE Driver for Novell NetWare v1.0
diskette in a
diskette drive.