Filter
Top Products
8-8
ANA-5910/5930/5940 User’s Guide
3
Insert the ALANE Driver for Novell NetWare v1.0 diskette in a
diskette drive.
4
If the diskette is in drive A, press Enter. If the diskette is in a
different location, press F3 to specify another path.
The system scans for available drivers.
5
From the Select a driver to install menu, select ALANE.LAN
and press Enter.
6
From the Board ALANE_1 (Driver ALANE) Actions menu,
select Select/Modify driver parameters and protocols and press
Enter.
7
Press F3 to manually set IPX frame types.
8
From the Frame Type List, select the appropriate frame type(s)
and press F10.
9
In the ALANE_1 Parameters section, configure the LANE
Client by changing the following parameters, as needed.
Parameter
Default
Value
Possible
Values Description
MAXIMUM
TRANSFER
RATE
1516 1516,
4544,
9234,
18190
Specifies the maximum
transfer size the ELANE
supports.
ELANE ID 0 0, 1, 2, 3 Identifies the slot
occupied by the
ELANE. The
ANA-5910/5930/5940
supports up to 4
emulated LANs,
numbered 0–3.
DCS_FEATUR
E
on on, off Enables dynamic
channel sharing (DCS),
which allows ATM to
transmit channels to
load-balance network
traffic.