Filter
Top Products
Chapter 11: Monitoring Your Storage Space ● 121
Silencing and Testing the Audible Alarm
By default, when a Warning- or Error-level event (see page 101) occurs
on any system in the Enterprise View, an audible alarm is triggered on
the local system. The alarm is a series of beeps, which sound every five
minutes until the event is resolved.
You can change the frequency and duration of the alarm, or choose to
disable the alarm on any system. See Changing a System’s Audible Alarm
Settings on page 67 for more information.
This section describes how to:
● Ensure the alarm is working on your local system (see below).
● Silence a sounding alarm (see page 122).
● Disable the alarm for a selected controller (see page 122).
Testing the Alarm
To test the audible alarm to ensure that it’s working on your local
system:
1 Ensure that the speakers on your local system aren’t muted.
2 In the Enterprise View, click on any controller.
3 In the menu bar, click Actions, select Alarm Actions, then click Te st
alarm.
The alarm sounds.
4 To stop the test, click OK.