Filter
Top Products
Chapter 11: Monitoring Your Storage Space ● 122
Silencing the Alarm
When a Warning- or Error-level event occurs, you can silence the alarm
on your local system while you fix the problem.
To silence the alarm, click the Silence button (shown at
right) in the main Adaptec Storage Manager window.
Disabling a Controller’s Alarm
You can disable the alarm for a selected controller, if required.
Caution: If you disable the alarm, no audible signal will sound
when a Warning- or Error-level event occurs on the controller.
1 In the Enterprise View, click on the controller you want.
2 In the menu bar, click Actions, select Alarm Actions, then click
Silence alarm.
The alarm is disabled for that controller.
Viewing Component Properties
Click on any component in the main window of Adaptec
Storage Manager, then click the Properties button (shown
at right) to view version numbers, status, model numbers, and other
information about that component.
The properties listed vary, depending on which type of component you
selected.
!