Adaptec ANA-62000 Network Card User Manual


 
10-7
Duralink64 Failover for NetWare
5 In the Existing Ports box, press Ins. The message No Ports
Present appears the first time you add a new pair.
Figure 10-8. Existing Ports Box
6 In the Available Ports box, select the primary port, and then
press Enter.
Figure 10-9. Available Ports Box
7 Press Ins to return to the Available Ports box.
8 Select the secondary port, and then press Enter.
9 Optional. In the Existing Ports box, the check mark indicates
the primary port. To change the primary port, select the second
port, and then press Enter.
10 Press Esc to apply the ports.
The selected ports appear in the
Existing Ports box.
Figure 10-10. Existing Ports Box
No Ports Present
Existing Ports
1. Adptsf1
2. Adptsf2
3. Adptsf3
4. Adptsf4
5. Adptsf5
6. Adptsf6
7. Adptsf7
8. Adptsf8
Available Ports
1. Adptsf1
2. Adptsf2
Existing Ports