Filter
Top Products
12-2
DuraLAN Fast Ethernet NICs User’s Guide
Installing Novell Client32
DOS
This section provides instructions on installing the ADPTSF 32-bit
driver for Novell Client32 using the ODI driver. Please note that
DuraLAN products do not support 16-bit drivers.
1
Download the latest version of Novell NetWare Client32 via
the Novell web site, www.novell.com.
2
Start DOS.
3
Insert your Novell NetWare Client32 package.
4
Typ e
install
and then press Enter.
5
Follow the instructions on your screen. Please refer to Selecting
Options if you are not sure which option to select.
6
When you are done, you may confirm settings in
startnet.bat
.
Note:
This installation setup assigns settings to one port
only. To assign settings to multiple ports, you must edit
startnet.bat. See Editing startnet.bat on page 12-4.