ADC 400F Network Card User Manual


 
About this User Manual
Megabit Modem 400F User Manual iii
ABOUT THIS USER MANUAL
Use this manual to install and configure the Megabit Modem 400F. This manual provides
instructions on:
information you will need to configure the modems
unpacking and inspecting the modems for installation
installing the modems
setting up parameters for your applications that will be used to configure the modems
configuring system parameters
configuring sessions between the modem and a service provider
monitoring and troubleshooting the modems
Chapter 9 provides a technical reference for implementing data transmission in the Megabit
Modem 400F. The chapter covers information about Asymmetric Digital Subscriber Line
(ADSL), rate adaptive transmission, the bridging/routing operating mode, and Simple Network
Management Protocol (SNMP) management.
IP addresses used in this manual are for example only. You will acquire your own addresses
from your information services coordinator to configure the Megabit Modem 400F. You will,
however, use the IP address specified in “Accessing the 400F Web Pages” on page 23 to access
the Megabit Modem 400F from a Web browser.
DOCUMENT CONVENTIONS
Two types of messages, identified by icons, appear in the text.
Notes contain information about special circumstances.
Cautions indicate the possibility of equipment damage or the possibility of
personal injury.