Filter
Top Products
Chapter 6: Configuring Sessions
Megabit Modem 400F User Manual 37
CONFIGURING RFC 1483 BRIDGING/ROUTING
SESSIONS
You can configure the modem as a bridge to forward Ethernet data based on MAC addresses,
as a router to route Ethernet-encapsulated IP datagrams based on IP addresses, or as both. From
the
EasySession pages, configure parameters for communicating between the modem and the
service provider over the WAN (page 38). Then, configure parameters for communicating
between the LAN and the modem (page 41). After setting up all appropriate Bridge/Router
WAN and LAN parameters, select the sessions that you want to activate (see page 46).
1 Click
EasySession on the Main Menu to access the EasySession page.
2 Click
Edit next to any Port 1-32 fieldtodisplaytheBrouter WAN Port Configuration page for the
selected port.