Filter
Top Products
Chapter 8: Maintenance and Troubleshooting
Megabit Modem 400F User Manual 57
Using the RS-232 Management Port
Use the RS-232 management port only when you must manually change the IP address and
subnet mask. Also, use the port if you do not remember the administrative IP address you
enteredonyourmodem.
1 Connect the modem to a PC as shown below.
2 Configure these communication settings (if using terminal emulation, select ANSI):
• 9600 baud
• no parity
• 8databits
• stop bit
• flow control off
D
S
L
P
O
W
E
R
10BASE-T
RS232
M
GMT
MDI
M
DI-X
RS-232 MGMT port
Megabit Modem 400F
Network device