Filter
Top Products
Selecting a Configuration Model
36 Megabit Modem 400F User Manual
SELECTING A CONFIGURATION MODEL
There are many configuration options for the Megabit Modem 400F from which you can select.
The following is a recommended model for configuring the Megabit Modem 400F:
1 Complete the WAN configuration on page 38 for Bridge/Router RFC 1483.
2 On the EasySession page:
Select the sessions you want active then click Enable. The modem will set up the session
with the service provider. The
Up radio button next to the session(s) will indicate that the
session was successfully set up.
3 Set up the LAN side configuration, including DHCP on page 41 for Bridge/Router RFC
1483. The modem will serve IP addresses to devices on the LAN (routing mode only).