ADC 400F Network Card User Manual


 
Chapter 4: Setting Up For Configuration
Megabit Modem 400F User Manual 27
Parameter Default Value Parameter Default Value
System Setup
System Mode SNMP parameters
TFTP parameters Enable trap sending Not enabled
TFTP Server IP Address 192.168.0.2 Trap Server IP Address 0.0.0.0
TFTP Server Net Mask 255.255.255.0 Trap Server Net Mask 255.255.255.0
TFTP Server Path blank field Trap Community String public
Set time and date blank field Get Community String public
Admin IP Address 0.0.0.0 Set Community String private
Parameter Default Value Parameter Default Value
Bridge/Router RFC 1483
Brouter WAN Configuration Not selected Spanning Tree Selected
Service Name Session 1 Brouter LAN Configuration
ATM VPI 0 Bridging Enabled
ATM VCI 100 Port Priority 100
Bridging Enabled Routing Disabled
Port Priority 101 RIP Direction Both
Routing Disabled RIP Version Rip1
RIP Direction Both IP Address 192.168.0.1
RIP Version Rip1 IP Net Mask 255.255.255.0
IP Address 192.168.10.1 Default gateway IP Address 0.0.0.0
IP Net Mask 255.255.255.0 Default gateway IP Net Mask 255.255.255.0
Encapsulation LLC DHCP Disabled
Static Mac Address Entry all zeros Start IP Address 192.168.0.2
MAC Address 0:0:0:0:0:0 Primary DNS 0.0.0.0
Source Port 0 Secondary DNS 0.0.0.0
Dest Port 0 Gateway 192.168.0.1
Static Route Entry
(IP Address, IP Network Mask,
Gateway IP Address)
0.0.0.0